Small, lightweight, and maneuverable paint sprayer - on a high cart.
No more compressor needed! Professionally coat furniture, garage doors, plastered or wallpapered walls, exterior facades, wooden fences, and much more. Suitable for glazes, varnishes, wall paints, emulsion paints, wood and corrosion protection.
Aggressive and corrosive liquids destroy soft plastics and seals, thereby shortening the machine's lifespan. Please ensure that the materials to be processed also match the pressure and nozzle size! If necessary, the materials must be thinned, please refer to the manufacturer's information.
Especially easy cleaning through return hose and a rotating nozzle of the spray gun. Clean Filter System to prevent clogged nozzles.
The airless paint sprayer is only 9kg light and therefore easy to transport. The model X6H is firmly mounted on a high cart and can be conveniently rolled to the workplace. The device stands securely and operation is very convenient.
650 watts of motor power and a high-pressure piston pump guarantee the finest spray mist, even with difficult-to-process materials. A patented internal bearing system and the also patented lubrication system for the piston rod ensure low maintenance and a long lifespan.
Advantages:
- easy to transport with high cart and comfortable working height
- suitable for glazes, varnishes, wall paints, emulsion paints, wood and corrosion protection
- can spray directly from paint containers with flexible suction hose
- X450 airless spray gun with rotating nozzle for easy cleaning
- 650 watts power consumption and high-pressure piston pump
- Clean Filter System prevents nozzle clogging
- easy pressure regulation with user-friendly symbols
- patented lubrication system for a maintenance-free piston rod
- patented internal bearing system
- low maintenance
Technical data:
- device is mounted on a high cart but can also be transported individually
- airless spray gun with 517 nozzle included (0.017 inches)
- max. nozzle size of 0.019 inches possible
- max. flow rate: 1.4l/min
- efficiency: depending on material 5-10m2 per minute
- operating pressure: 200 bar
- spray pressure 120 bar
- motor power: 650W
- emission sound pressure level at workplace: LpAd = 75dB
- cable length: 1.5m
- weight: 13.5kg complete with cart, hose, and spray gun
Practical tips:
- Please fill the device with paint before starting your project.
- Spray back as much paint into the bucket until it comes out evenly from the gun. Your device is now ready for operation.
- Please first draw some lines on a piece of cardboard. This way you can easily test the correct performance of the machine in combination with the thickness of your material. Please adjust the nozzle size or thin the material to be processed if necessary.
- If the lines are even, start on the ceiling
- Only tape the walls, this is not necessary for the ceiling.
- Always start with the ceiling and then work on the walls. This will give you a particularly good result.
- Please keep the paint spray system about 20 cm away from the wall or ceiling to achieve optimal atomization.
- Please avoid swinging your arm while spraying and always keep the spray gun perpendicular to the surface.
- Please try to briefly release the trigger at the beginning and end of each line. This prevents the beginning and end of the line from being double-covered.
Commissioning:
Please follow the steps for commissioning, only then will sufficient working pressure be built up.
- Immerse the suction tube and return hose in the paint container
- the overpressure valve (black lever) must be in the Prime valve position
- the pressure control knob should be at the lowest setting
- turn the power switch to I
- turn the control knob clockwise until the device starts
- wait until the paint comes out of the return hose and a circuit is formed
- set the overpressure valve (black lever) to the Spray valve position
- operate the spray gun several times and spray the paint into the paint container. Increase the pressure with the control knob until the desired paint atomization is achieved
Product safety information
Manufacturer information:
Dino-Power
MINGGUANG RD NO.168
Ningbo, , 315000
support@ipa-gmbh.com
https://pflegen-polieren.de
Responsible person:
I.P.A. GmbH
Plauerhaeger Str. 26
Mecklenburg-Vorpommern
Plau am See, Deutschland, 19395
support@ipa-gmbh.com
https://www.ipa-gmbh.com
| Item weight: |
14,70 kg
|
| Dimensions
( Length × Width × Height ):
|
77,00 × 46,00 × 52,00 cm |
- Airless paint sprayer on a high cart
- Airless spray gun with 517 nozzle (0.017 inches)
- 7.5m hose (up to 15m possible)
- 30cm extension rod for spray gun
- Manual in German
