Dino-Power DP-X25 - 2.4L/min² max. flow rate and 150bar spray pressure.
Paint sprayer for small and medium-sized businesses. The 1400-watt motor allows a max. spray pressure of 150bar. The paint sprayer is suitable for low to medium viscosity materials, such as glazes, varnishes, wall paints, emulsion paints, wood and corrosion protection, latex, and acrylic. Depending on the material, up to 15m² per minute can be coated.
Aggressive and corrosive liquids destroy soft plastics and seals, thereby shortening the machine's lifespan. Please ensure that the materials to be processed also match the pressure and nozzle size! If necessary, the materials must be thinned, please refer to the manufacturer's information.
Advantages:
- no compressor needed
- suitable for low to medium viscosity materials, such as glazes, varnishes, wall paints, emulsion paints, wood and corrosion protection, latex, and acrylic
- flexible suction hose
- powerful 1400 watts
- 150bar maximum spray pressure
- 2.4L/min² max. flow rate
- includes hose and spray gun
Technical data:
- Airless spray gun X-450 with 517 nozzle included (0.017 inches)
- max. nozzle size of 0.025 inches possible
- max. flow rate: 2.4L/min
- Efficiency: depending on material up to 15m² per minute
- Operating pressure: max. 210 bar
- Spray pressure: max. 150 bar
- Motor power: 1400W
- Emission sound pressure level at the workplace: LpAd = 85dB
- Cable length: 1.5m
- Weight: 22kg complete
Practical tips:
- Please fill the device with paint before starting your project.
- Spray back as much paint into the bucket until it comes out evenly from the gun. Your device is now ready for use.
- Please first draw some lines on a piece of cardboard. This way, you can easily test the correct performance of the machine in combination with the thickness of your material. Please adjust the nozzle size or thin the material to be processed if necessary.
- When the lines are even, start on the ceiling
- Only tape the walls, this is not necessary for the ceiling.
- Always start with the ceiling and then work on the walls. This will give you a particularly good result.
- Please keep the paint spray system about 20 cm away from the wall or ceiling to achieve optimal atomization.
- Please avoid swinging your arm while spraying and always keep the spray gun perpendicular to the surface.
- Please try to briefly release the trigger at the beginning and end of each line. This prevents the beginning and end of the line from being double-covered.
Scope of delivery:
- 1 x Airless paint sprayer
- 1 x Airless DP X-450 spray gun with 517 nozzle (0.017 inches)
- 1 x 15-meter hose (up to 30m possible)
- 1 x 45cm extension rod for spray gun
- Wrench, lubricating oil
- Manual in German
Product safety information
Manufacturer information:
Dino-Power
MINGGUANG RD NO.168
Ningbo, , 315000
support@ipa-gmbh.com
https://pflegen-polieren.de
| Item weight: |
21,24 kg
|
| Dimensions
( Length × Width × Height ):
|
49,00 × 43,00 × 48,00 cm |
- 1 x Airless paint sprayer DP-X25
- 1 x Airless DP X-450 spray gun with 517 nozzle (0.017 inch)
- 1 x 15 meter hose (up to 30m possible)
- 1 x 45cm extension rod for spray gun
- Wrench, lubricating oil
- Manual in German
