RETECFLEX - the universal tool for repairing, renovating, and modernizing
- Extraction hood: with stepless height adjustment
- Universally applicable tool system that can be adapted for many applications in renovation and modernization. Compact, handy, and ideally suited for processing smaller areas as well as the edge areas of large surfaces
- Spindle lock
- Sanding disc for abrasive materials. For removing formwork transitions and concrete runners on freshly concreted surfaces, mineral adhesives, screeds, plaster, mortar, abrasive sand-lime brick, sandstone, chamotte, asphalt.
- Microprocessor electronics: speed preselection, constant speed control via tachogenerator, soft start, restart protection after power failure, overload protection, and temperature monitoring
- Motor: powerful and high-torque for fast work progress
- Anti-kickback, switches off the motor when the tool is blocked
- Completely encapsulated electronic module prevents damage from dust. The triple winding protection reduces motor wear and extends service life
- Special gearbox: special gear reduction for high torque in the medium and low-speed range
- With steplessly adjustable, vibration-damped, ergonomic bow handle for optimal handling and machine guidance
- Dust-protected on/off switch
- Effective dust extraction through large extraction cross-section. Easy and quick connection possibility with the FLEX clip system. No adapters and reducing sleeves required
Technical data:
- Power output = 950 watts
- Tool holder = M 14
- Cable length = 4.0 m
- Dimensions (L x W x H) = 355 x 160 x 67 mm
- Weight = 3.1 kg
- Max. grinding body Ø = 115 mm
- Max. milling head Ø = 80 mm
- Milling depth = 0-6 mm
- No-load speed = 1900-5500 /min
- Power consumption = 1600 watts
Scope of delivery
- 1 Flex renovation milling machine RE 16-5 115, Kit E-Jet
- 1 Diamond grinding disc screed-jet 503.061
- 1 Extraction hood grinding Ø 115 mm with brush ring 366.528
- 1 Setting table milling Ø 80 mm 366.897
- 1 Sanding disc Ø 115/M14 Velcro Bowl 503.754
- Sanding disc set corundum Ø 115
- 1 Bow handle
- 1 Ring spanner, SW 13 505.072
- 1 Allen key, SW 4 102.229
- 3 Mounting screws, M 8
- 1 Transport case L-BOXX® 238 414.093
- 1 Case insert 414.182
Product safety information
Manufacturer information:
FLEX-Elektrowerkzeuge GmbH
Bahnhofstraße 15
Baden-Württemberg
Steinheim, Deutschland, 71711
https://info@flex-tools.com
| Dimensions
( Length × Width × Height ):
|
44,20 × 35,70 × 25,30 cm |
- 1 Flex renovation grinder RE 16-5 115, Kit E-Jet
- 1 Diamond grinding disc Estrich-Jet 503.061
- 1 Suction hood grinding Ø 115 mm with brush ring 366.528
- 1 Milling table Ø 80 mm 366.897
- 1 Grinding disc Ø 115/M14 Velcro Bowl 503.754
- Grinding disc set corundum Ø 115
- 1 Bow handle
- 1 Ring spanner, SW 13 505.072
- 1 Allen key, SW 4 102.229
- 3 Mounting screws, M 8
- 1 Transport case L-BOXX® 238 414.093
- 1 Case insert 414.182
