Renovation grinder with variable speed for edge-close, dust-free grinding, 125 mm
- Variable speed to minimize dust when the tool protrudes, as well as better control for finer work with less pressure, e.g., in edge areas and for final smoothing of surfaces
- Ideally suited for processing walls, ceilings, and floors. Efficient and economical work through optimal coordination of machine and grinding disc
- Grinding disc suitable for grinding concrete parts, sanding weathered old concrete, hard cement plaster, removing formwork transitions and concrete runners, cured epoxy resin coatings, and the sinter layer on concrete parts. High grinding performance and durability due to innovative segment construction. Optimal substrate preparation for further coating.
- Microprocessor electronics with soft start, restart protection after power failure, temperature monitoring, overload protection, CDC constant electronics
- Reliable 1600 watt high-performance motor with sufficient power reserves
- Dust extraction: protects against dust nuisance, reduces disc wear, keeps concrete pores open for recoating
- Anti-kickback, switches off the motor when the disc is blocked
- Protective hood: with swiveling segment for grinding up to the wall and height-adjustable to adapt to the respective disc height for optimal dust extraction
- With infinitely adjustable, vibration-damped, ergonomic bow handle for optimal handling and machine guidance
- For quick hose connection: FLEX clip connection for Ø 32 mm locking connection
Technical data:
- Cable length = 4.0 m
- Weight = 3.1 kg
- Disc Ø = 125 mm
- No-load speed = 4500-7800 /min
- Power consumption = 1600 watts
- Power output = 950 watts
- Tool holder = M 14
Scope of delivery
- 1 Flex renovation grinder LDE 16-8 125 R, Kit TH-Jet
- hold
- Recessed spindle lock against unintentional activation
-
-
- Basic equipment
- 1 Diamond grinding disc Thermo-Jet 359.378
- 1 Suction hood with brush ring 498.475
- 1 Bow handle
- 3 Cable holders 252.188 (3x)
- 1 Allen key, SW 4 102.229
- 1 Pin wrench 392.537
- 1 Transport case L-BOXX® 238 414.093
- 1 Case insert 414.131
Product safety information
Manufacturer information:
FLEX-Elektrowerkzeuge GmbH
Bahnhofstraße 15
Baden-Württemberg
Steinheim, Deutschland, 71711
https://info@flex-tools.com
| Dimensions
( Length × Width × Height ):
|
44,20 × 35,70 × 25,30 cm |
- 1 Flex renovation grinder LDE 16-8 125 R, Kit TH-Jet
- hold
- Recessed spindle lock to prevent unintentional activation
-
-
- Basic equipment
- 1 Diamond grinding disc Thermo-Jet 359.378
- 1 Dust extraction hood with brush ring 498.475
- 1 Bow handle
- 3 Cable holders 252.188 (3x)
- 1 Allen key, SW 4 102.229
- 1 Pin spanner 392.537
- 1 Transport case L-BOXX® 238 414.093
- 1 Case insert 414.131
