Battery Wall and Ceiling Sander Giraffe® with Interchangeable Head System 18.0 V
- Cardanically mounted sanding head ensures high flexibility and optimal adaptation when sanding walls and ceilings.
- The effective suction between the brush ring and the sanding pad prevents clogging of the abrasive and ensures dust-free work.
- Connection option for the FLEX safety vacuum cleaners with the FLEX clip system on the guide tube.
- Dust-protected on/off switch.
- LED battery capacity indicator.
- FLEX battery system: operation with all FLEX 18.0 V battery packs.
- Electronic Management System (EMS) protects the machine, extends the service life, and increases efficiency.
- Electronics: speed preselection with dial, overload protection, restart protection, and temperature monitoring.
- Brushless motor with higher efficiency and longer service life.
- Very handy, lightweight machine with optimal operating comfort. Allows fatigue-free and ergonomic work.
- Equipped with an innovative interchangeable head system. Sanding heads can be attached and removed with a click.
- Orbital sanding head with 4 mm stroke, allowing perfect surfaces in the Q3 and Q4 range to be achieved effortlessly.
- Easy handling: due to optimal balance between motor and sanding head.
- Reliable power transmission and high flexibility through the flexible drive shaft. Decades-proven "FLEX technology". This design principle reduces the weight at the head of the Giraffe® to a minimum. This facilitates handling.
Technical Data:
- Sanding disc Ø = 225 mm
- Tilt angle at the head = 100 °
- Length = 1440 mm
- Weight without battery/head = 2.8 kg
- Battery voltage = 18 V
- Battery capacity = 2.5 / 5.0 Ah
- No-load speed = 1130-1730 /min
- No-load stroke rate (MH-T) = 3900-5850 /min
- No-load stroke rate (MH-X) = 3200-4700 /min
Scope of Delivery
- 1 Flex Giraffe GE MH 18.0-EC/5.0 Set+MH-X
- 1 Orbital sanding head MH-X 457.205
- 1 Clip quick-release ring SH-FC 32 406.023
- 2 Batteries 5.0 Ah AP 18.0/5.0 445.894
- 1 Charger CA 10.8/18.0 417.882
- 1 Transport bag 408.867
Product safety information
Manufacturer information:
FLEX-Elektrowerkzeuge GmbH
Bahnhofstraße 15
Baden-Württemberg
Steinheim, Deutschland, 71711
https://info@flex-tools.com
| Dimensions
( Length × Width × Height ):
|
155,00 × 35,50 × 38,00 cm |
- 1 Flex Giraffe GE MH 18.0-EC/5.0 Set+MH-X
- 1 Eccentric Sanding Head MH-X 457.205
- 1 Clip Quick Release Ring SH-FC 32 406.023
- 2 Batteries 5.0 Ah AP 18.0/5.0 445.894
- 1 Charger CA 10.8/18.0 417.882
- 1 Transport Bag 408.867
