Wall and Ceiling Sander Giraffe® with Interchangeable Head System
- Connection option for FLEX safety vacuum cleaners with the FLEX clip system on the guide tube
- Dust-protected on/off switch
- Very flexible with an optional extension (accessory) of 500 mm for large room heights, tool-free assembly
- With the extensive range of abrasives, ideally suited for sanding drywall, full thermal insulation polystyrene boards, and for paint preparation
- The processing of very large areas and room heights up to 3.40 m is possible with the optional use of the GM 340
- With the innovative textile transport system, the machine and accessories can be transported effortlessly. The Giraffe® does not need to be assembled and is ready for immediate use
- Electronics: with constant speed control, soft start, overload protection, and speed preselection with control wheel
- Very handy, lightweight machine with optimal operating comfort. Enables fatigue-free and ergonomic working
- Equipped with an innovative interchangeable head system. Sanding heads can be attached and removed with a click
- Orbital sanding head with 4 mm stroke, allowing perfect surfaces in the Q3 and Q4 range to be achieved effortlessly
- Easy handling: due to optimal balance between motor and sanding head
- Reliable power transmission and high flexibility through the flexible drive shaft. Proven "FLEX technology" for decades. This design principle reduces the weight at the head of the Giraffe® to a minimum. This facilitates handling.
- Cardanically mounted sanding head ensures high flexibility and optimal adaptation when sanding walls and ceilings.
- The effective suction between the brush ring and sanding pad prevents clogging of the abrasive and ensures dust-free working
Technical Data:
- Tilt angle at the head = 100 °
- Cable length = 5.0 m
- Length = 1520 mm
- Weight = 4.2 kg
- Power consumption = 710 watts
- Power output = 410 watts
- No-load speed = 1100-1650 /min
- No-load stroke rate = 3100-4600 /min
- Sanding disc Ø = 225 mm
Scope of Delivery
- 1 Flex Giraffe GE 7 +MH-X +SH 230/CEE
- 1 Orbital sanding head MH-X 457.205
- 1 Clip quick-release ring SH-FC 32 406.023
- Antistatic suction hose 32 mm Ø x 4 m with locking connection and connection sleeve for vacuum cleaner with secondary air regulation 406.708
- 1 Transport bag 408.867
Product safety information
Manufacturer information:
FLEX-Elektrowerkzeuge GmbH
Bahnhofstraße 15
Baden-Württemberg
Steinheim, Deutschland, 71711
https://info@flex-tools.com
| Dimensions
( Length × Width × Height ):
|
155,00 × 35,50 × 38,00 cm |
- 1 Flex Giraffe GE 7 +MH-X +SH 230/CEE
- 1 Eccentric Sanding Head MH-X 457.205
- 1 Clip Quick-Release Ring SH-FC 32 406.023
- Antistatic Suction Hose 32 mm Ø x 4 m with Locking Connection and Connector Sleeve for Vacuum Cleaners with Secondary Air Regulation 406.708
- 1 Transport Bag 408.867
